AT&T 955 Change Display Language, Set the Time/Date, Assign an Extension Number to Your Phone

SET UP SYSTEM FEATURES

Change Display Language

1Press G.

2Press -until the screen displays LANGUAGE, then press >.

3Press -or +until the screen displays your language selection.

4Press Sto store your selection.

Set the Time/Date

NOTE: The time and date are automatically set with incoming call information. Follow the steps below to set manually.

1Press G.

2Press -until the screen displays TIME/DATE.

3Press >until screen displays HOUR.

4Press -or +to select the correct hour setting.

5Press Sto store the hour setting. The screen displays MINUTES.

6Press -or +to select the correct minutes setting.

7Press Sto store the minutes setting. The screen displays AM/PM.

8Press -or +to select AM or PM.

9Press Sto store the setting. The screen displays MONTH.

10Press -or +to select the correct month.

11Press Sto store the setting. The screen displays DATE.

12Press -or +to select the correct day of the month.

13Press Sto store the setting. The screen displays DAY OF WEEK.

14Press -or +to select the correct day of the week.

15Press Sto store the setting.

Assign an Extension Number to Your Phone

1Press G.

2Press -until the screen displays EXTENSION NO, then press >.

3Press -or +to select the desired extension number (from 11 to 22).

4Press Sto store your selection.

NOTE: If you duplicate an extension number, you will hear a repeating short ring. Repeat Steps 1-4and assign a different number (from 11 to 22).

SET UP SYSTEM FEATURES

Turn COVM Indicator On or Off for Each Line

If you subscribe to Voice Mail service with your local telephone service provider, turn the COVM indicator on to have the screen display the appropriate line numbers when there are messages waiting. You can turn the COVM indicator on or off for each line individually or for all lines at once. If you do not subscribe to Voice Mail service, turn the COVM indicator off for each line.

1Press G.

2Press -until the screen displays COVM ON/OFF, then press >.

3Press -or +until the screen displays the desired line number, then press >.

4Press -or +to select the desired setting.

5Press Sto store your selection.

6Repeat Steps 1-5to change the indicator setting for additional lines.

Turn the Ringer On or Off for Each Line

1Press G.

2Press -until the screen displays RINGER ON/OFF, then press >.

3Press -or +until the screen displays the desired line number, then press >.

4Press -or +to select the desired setting.

5Press Sto store your selection.

6Repeat Steps 1-5to change the ringer setting for additional lines.

Select the Ringer Type

1Press G.

2Press -until the screen displays RINGER TYPE, then press >.

3Press -or +to select the desired setting. You will hear a sample of each ringer type as you move through the settings.

4Press Sto store your selection.

16 17