AT&T 955 Plug one end of the coiled handset cord into the jack on, Mount the phone on the wall

Models: 955

1 36
Download 36 pages 33.94 Kb
Page 8
Image 8

INSTALLATION

5 Connect the handset cord.

Plug one end of the coiled handset cord into the jack on the

INSTALLATION

Two Two-Line Jacks

left side of the phone. Plug the other end into the handset, and

hang up.

6 Connect the power adapter to the telephone.

Use only the power adapter provided with this product. To obtain

a replacement, call 1 800 222–3111.

Plug one end of the power adapter into the jack labeled ADAPTER

on the back of the phone.

NOTE: If the screen displays POWERFAIL the first time you plug in the phone, press any key to clear the screen.

Modular

Telephone Jack

Lines 3 and 4

Standard

Electrical

Outlet

Power Cord

Modular

Telephone Jack

Lines 1 and 2

7Check for dial tone.

Lift the handset and listen for a dial tone. If you cannot hear a dial tone, turn to IN CASE OF DIFFICULTY.

8Mount the phone on the wall

Four One-Line Jacks

Modular

Standard

Electrical

Telephone Jacks

Outlet

Lines 3 and 4

 

 

Power Cord

Modular Telephone Jacks

Lines 1 and 2

9Plug the power adapter into a standard electrical outlet not controlled by a wall switch.

10Initialization.

As soon as you connect the power cord, the system runs a quick self-test and the screen displays Initializing for about seven seconds. When the test is complete, the system enters an initial setup mode (this happens the first time you plug in the unit only) and the screen displays press PROG to setup your phone. See SET UP SYSTEM FEATURES beginning on page 15.

12

13

Page 8
Image 8
AT&T 955 user manual Plug one end of the coiled handset cord into the jack on, Connect the power adapter to the telephone