Connecting a VS-42H 4x2 HDMI Matrix Switcher
9
To connect the VS-42H 4x2 HDMI Matrix Switcher, as illustrated in the
example in Figure 2, do the following1
1. Connect
:
2
2. Connect
up to four HDMI sources (for example, DVD players) to the four
IN HDMI connectors.
3
3. If required, connect a PC and/or controller to the RS-232 port (see
section
the OUT 1 and OUT 2 HDMI connectors to up to two HDMI
acceptors (for example, LCD displays with built-in speakers).
7.3) and/or the ETHERNET port (see section 7.4).
4. Connect the power connector to the mains electricity (not shown in
Figure 2).
5. If required, acquire the EDID (see sectio n 7.1)
Press an INPUT SELECTOR button (two sets of buttons 4
1 Switch OFF the power on each device before connecting it to your VS-42H. After connecting your VS-42H, switch on its
power and then switch on the power on each device
from 1 to 4) to
choose which HDMI input to route to the outp uts.
2 You do not have to connect all the HDMI sources
3 You do not have to connect both outputs
4 TO OUTPUT 1 and TO OUTPUT 2