Kramer Electronics VS-42H 8 Technical Specifications

Technical Specifications

7.4.2 Connectin g the ETHERNET Port via a Ne twork Hub (Straight-Through

Cable)

You can connect the Ethernet port of the VS-42H to the Ethernet port on a

network hub or network router, via a straig ht-through cable with RJ-45.

7.4.3 Control Configuration via the Ethernet Port

To control several units via the Ethernet, connect the Mster unit via the

Ethernet port to the LAN port of your PC. Use your PC initially to configure

the settings (see section 7.4).

8 Technical Specifications

Table 4 includes the technical specifications:

Table 4: Technical Specifications1

INPUTS:

of the VS-42H

4 HDMI connectors

OUTPUTS: 2 HDMI connectors

BANDWIDTH: Supports up to 1.65Gbps bandwidth per graphic channel

COMPLIANCE WITH

HDMI STANDARD:

Supports HDMI and HDCP

AUDIO FORMAT: Supports digital Dolby up to 5.1 channels2

RESOLUTION:

Up to UXGA; 1080p

POWER SOURCE: 100−264V AC; 50/60Hz, 10VA

CONTROLS: Front panel buttons, infrared remote control transmitter, RS-232, Ethernet

DIMENSIONS: 19" x 7" x 1U W, D, H rack mountable

WEIGHT: 2.5kg (5.5lbs) approx.

ACCESSORIES: Power cord, rack “ears”, IR remote control, Null-modem a dapter

OPTIONS: Kramer HDMI cables

1 Specifications are subject to change without notice

2 Set the EDID to support the audio format

3 For best results, use Kramer cables such as the C-HM/HM series, the C-HM/DM series and/or our HDMI over fiber optics

C-FOHM/FOHM series