Kramer Electronics user manual Connecting the VS-81H

5	Connecting the VS-81H
	i	Always switch off the power to each device before connecting it to your
		VS-81H. After connecting your VS-81H, connect its power and then

switch on the power to each device.

To connect the VS-81H8x1 HDMI Switcher (as illustrated in Figure 3), do the following:

1.If required:

ƒSet the appropriate INPUTS to the DVD mode (see Section 6.1)

ƒAcquire the EDID (see Section 6.2)

2.Connect the HDMI sources as follows:

You do not have to connect all the HDMI sources.

Alternatively, you can connect a PC to any of the inputs and set those inputs to the PC mode (see Section 6.1)

ƒA multimedia player to INPUT 1

ƒA set top box to INPUT 2

ƒA DVD player to INPUT 6

ƒA DVD player to INPUT 8

3.Connect the OUTPUT HDMI connector to an HDMI acceptor (for example, a plasma display).

4.If required, connect a PC and/or controller to the RS-232 port (see Section6.3) and/or the ETHERNET port (see Section 6.4).

5.Connect the power connector to the mains electricity (not shown in Figure 3).

Press an INPUT SELECTOR button (from 1 to 8) to choose the HDMI input to route to the output.

VS-81H - Connecting the VS-81H 9