Kramer Electronics VS-84H user manual Feature Function

Defining the VS-84H 8x4 HDMI Matrix Switcher

Figure 1: VS-84H 8x4 HDMI Matrix Switcher Front Panel

Table 1: VS-84H 8x4 HDMI Matrix Switcher Front Panel Features

#		Feature		Function
1	IR LED			Lights yellow when receiving signals from the infrared remote control transmitter
2	IR Receiver			Signal receiver for the Infrared remote control transmitter
3	POWER LED			Lights when the device is turned on
4	ALL Button			Press followed by an input button to connect the selected input to all outputs1
5	OFF Button			Press after pressing an output button to disconnect the selected output from the inputs.
				To disconnect all the outputs, press ALL followed by OFF
6	SELECT Buttons2		OUT (1 to 4)	Press to select an output to switch followed by an input
7			IN (1 to 8)	Press to select the input to switch after selecting an output
8	STO Button			Press to store the current switching setting to a preset (see Section 7.3)
9	RCL Button			Press to recall the current switching setting from a preset (see Section 7.3)
8	LOCK Button			Press and hold to toggle the locking/release of the front panel buttons.
				When storing or recalling presets, press to store or recall the preset (see Section 7.3)
9	EDID Button			Press to capture the EDID (see Section 7.2)
12	INPUT 7-segment LED Display			Displays the input currently switched to the output which is marked above each input

1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs 2 These are also used for storing and recalling device setups (see Section 7.3)

6 KRAMER: SIMPLE CREATIVE TECHNOLOGY