Kramer Electronics WP-121 user manual Notes, Terminal Block Pinouts

5.2Wiring the 9-Pin Terminal Block Line Output Connector

The 9-pin terminal block is a plug-in connector for attaching the STP cable. Follow the colors of the color-coded sticker on these terminals for proper connection of the cable.

Figure 7 defines the pinouts for the terminal block.

Figure 7: Terminal Block Pinouts

Notes:

•Use the connector clips only when removing wires, not when inserting them

•Each wire should protrude 9mm (0.35") from the plastic insulation so that it can be easily connected. To prevent the wires crossing, be sure that each wire is fully inserted

10 WP-121 - Installing and Connecting the WP-121