Placement
| Before you install the SACD Standard into your system, review the |
|
|
| following guidelines to choose the location for the SACD Standard. |
|
|
|
|
| This will facilitate a clean, |
| Standard does not require any type of special rack or cabinet for |
| installation. For the dimensions of the SACD Standard, see |
| Specifications, on the back cover of this manual. |
| Place the SACD Standard on a firm, level surface, away from exces- |
| sive heat, humidity, or moisture. The SACD Standard requires at |
| least two inches (5 cm) of clearance on each side and at least two |
| inches (5 cm) of clearance above and below the component to pro- |
| vide adequate ventilation. Installations inside cabinetry may need |
| extra ventilation. |
| Do not place the SACD Standard near hum sensitive components |
| such as preamplifier phono stages or turntables. Although the SACD |
| Standard is well shielded, placing it near these components could |
| create interference and cause hum. |
| The SACD Standard incorporates an advanced suspension system and |
Note | |
| does not require additional mass coupling or isolation. You may experiment |
| with feet or cones as long as they are not permanently affixed to the unit. |
| Any unauthorized modifications to the unit or electronics will void the war- |
| ranty. |
| Do not attach enhancement accessories such as rings, mats, or |
IMPORTANT | |
| dampers to individual discs. These accessories may interfere with the |
| disc transport, resulting in erratic playback and/or poor sound. |
AC Power Guidelines
The SACD Standard has superb regulation and does not require a dedicated AC circuit. Avoid connections through extension cords or multiple AC adapters. High quality 15 amp grounded AC strips are acceptable. High quality AC line conditioners or filters may be used if they are grounded and meet or exceed the unit’s power supply rating of 100 VA.
Krell SACD Standard | 5 |