Manuals / Krell Industries / Home Audio / CD Player

Krell Industries Evolution 505 manual Remote Control Description, Battery Installation and Removal

Models: Evolution 505

1 32
Download 32 pages 14 Kb
Page 18
Image 18
Remote Control Description

(SECTION THREE: Anatomy of the Evolution 505 continued)

Remote Control Description

See Figure 2 on the previous page

The Evolution 505 remote control provides the same functions as the front panel. In addition, there are three keys that are unique to the remote control, and these are described below.

22 Repeat Key

Replays selected track until new feature is selected. See also, Using the Repeat Key, on page 27.

23 Repeat A-B Key

Creates a loop between two pre-determined points within a single track or sequential tracks. Press once to select the start of the repeat loop (A), and press again to select the end of the loop (B). See also, Using the Repeat A/B Key, on page 27.

24 Audio Key

Cycles between the stereo and multi-channel layers of an SACD disc.

The following remote control keys are not operational:

setup, disc, subt, angle, and ret.

Battery Installation and Removal

The remote control uses 2 AAA-size 1.5 Volt batteries. Batteries are included with the shipment. To install the batteries:

1.Remove the remote control backplate, using the supplied T-10 Torx wrench.

2.Install the batteries, following the battery position diagram on the plastic battery receptacle.

3.Replace and secure the backplate.

Note

Replace batteries when remote control function becomes intermittent.

Do not use a knife or other sharp object to remove the backplate, as this may damage the remote control finish.

Remove batteries if the remote control is not used for a long period of time. Battery leakage can damage the remote control.

Page 17 Page 19
Page 18
Image 18
Krell Industries Evolution 505 Remote Control Description, Battery Installation and Removal, Repeat Key, Repeat A-BKey
Page 17 Page 19

FAQ

How does the Repeat Key function work?

The Repeat Key replays the selected track until a new feature is selected. For more details, refer to the Using the Repeat Key section on page 27.

What is the purpose of the Repeat A-B Key?

The Repeat A-B Key creates a loop between two pre-determined points within a single track or sequential tracks. Press once to select the start of the repeat loop A, and press again to select the end of the loop B. See also, Using the Repeat A/B Key section on page 27.

How to install and replace the batteries on the remote control?

The remote control uses 2 AAA-size 1.5 Volt batteries, which are included with the shipment. To install the batteries, remove the remote control backplate using the supplied T-10 Torx wrench, install the batteries following the battery position diagram, and replace and secure the backplate. Replace batteries when remote control function becomes intermittent, and remove batteries if the remote control is not used for a long period of time to prevent battery leakage.

How do I install the batteries on the remote control?

The batteries can be installed by removing the remote control backplate using the supplied T-10 Torx wrench, then following the battery position diagram to install the batteries, and finally replacing and securing the backplate.

What are the unique keys on the Evolution 505 remote control?

The Evolution 505 remote control provides three unique keys - the Repeat Key, the Repeat A-B Key, and the Audio Key. These keys offer additional functions beyond the front panel controls.

How to use the Repeat A-B function?

The Repeat A-B Key creates a loop between two pre-determined points within a single track or sequential tracks. Press once to select the start of the repeat loop A, and press again to select the end of the loop B. See also, Using the Repeat A/B Key section on page 27.