Krell Industries Evolution 505 manual Front Panel Description, Power, Transport Functions

(SECTION THREE: Anatomy of the Evolution 505 continued)

Front Panel Description

Power, transport, and display features are described below (see Figure 1 on the previous page). Most front panel features can be activated using the remote con- trol keys. Descriptions of special operational features are outlined on page 24.

Power

1 Power Button or Key

Use this button or key to switch the Evolution 505 between the stand-by and operational modes.

2 Stand-by/Power LED

This LED illuminates red (stand-by) when the Evolution 505 is plugged into a standard live AC wall receptacle and the rear panel power switch is turned on. The LED will illuminate blue (operational mode) when the power button (1) or key is pressed while the Evolution 505 is in stand-by mode.

Remote Functions on the Front Panel

3 Infrared Sensor

The infrared sensor receives commands from the Evolution 505 remote con- trol. For proper remote control operation, make sure the infrared sensor is not covered or obstructed.

Transport Functions

4 Pause Button or Key

Temporarily suspends playback of a track. To resume playback at the point pause was engaged, press play.

5Stop Button or Key Stops disc playback.

6Play Button or Key

Starts playback from the beginning of the disc. See also How to Play a Disc, page 16.

7Open/Close Button or Key Opens or closes the disc transport.

8Track Skip Forward and Back Buttons or Keys

Track forward selects the track that follows the current track. Track back selects the track that precedes the current track. Press repeatedly (do not hold) to skip multiple tracks.

9 Search Forward and Back Buttons or Keys

Press and hold to scroll forward or backward in the current track. Press play to return to normal playback.