Krell Industries KRS-IA C.D. Section Set Up, Kyocera, other, models, Magnavox, Meridian, Pioneer

C.D. SECTION SET UP

The Compact Disc input of the KRS-IA is routed through an adjustable three pole phase correcting filter, a feature unique to KRELL preamps. The switches to adjust the filter are located underneath the phono section PC board. To access them, remove the phono section board by taking out the two screws holding the board in place with the allen driver. then simply slide the board forward out of its' connector and out of the preamp. The 8 position switch, identical to the phono loading switch, will now be visible.Below is a listing of settings for various C.D. players.

Kyocera	901			i,	2	open,		3,	4,	5,	6,	7,	8	on
Kyocera,	other		models	i,	3,	5,	6,	7	open,		2,	4,	8	on
Magnavox	650			4,	5,	8	open,		i,	2,	3,	6,	7	on
Meridian	MCD	&	Pro	i,	6,	7	open,		2,	3,	4,	5,	8	on
NAD				i,	3,	4, 5, 6, 7 open,						2,	4	on
Nakamichi	OMS 5		& 7	i,	3,	4,	6,	7	open,		2,	5,	8	on
Pioneer	SCD	909		2,	3	open,		i,	4,	5,	6,	7,	8	on
PS Audio	CD	1		3,	6,	7,	8	open,		i,	2,	4,	5	on
Sony 101 & 701 ES				i,	2,	3	open,		4,	5,	6,	7,	8	on
Sony CD	302			3,	4,	5,	6,	8	open,		i,	2,	7	on

If you do not find your player listed you can contact your dealer or the factory for settings. In general, if you have a Sony type unit adjust I, 2, 3, 8 open, 4, 5, 6, 7 on; if you have a Phillips type unit adjust to 3, 4, 5, 6, 7 open, i, 2, 8 on. These are average settings for the two systems.

After adjusting the C.D. filter replace the phono section board by reversing the removal procedure described above.