Krell Industries KSP7B owner manual About The Owners~ Manual, A.Unpacking, B. Phono Section Set-Up

ABOUT THE OWNERS~ MANUAL

The KSP-7BOwner's Manual is divided into various groups of information. The purpose of he document as a whole is to familiarize you with the unit and guide you through its set-up, installation and operation in a logical progression. The Table of Contents is as follows:

A.Unpacking

B.Phono Section Set-Up

C.Installation: 1. Cautions

2.Unit Location Guidelines and Installation

3.Connection of Inputs and Outputs

4.Turn-on of the Preamplifier

D.Operation

E.Warranty and Service Information

A.UNPACKING

Remove the KSP-7B, power supply and accessories from the shipping container. Store all packing materials in a cool, dry place for future use. Inspect the unit for shipping damage; if any damage is evident, contact your dealer immediately. If the unit is in proper condition, proceed with installation.

In addition to the preamplifier and power supply, you will find a small "L" shaped allen driver. This is used to remove the top cover to gain access to the phono section gain and input impedance loading adjustments.

Set-up of the phono section should be completed before installation of the preamplifier.

B. PHONO SECTION SET-UP

Important Note: For the initial adjustment of the phono section the KSP-7B

should not be connected to its power supply. For adjustments to the phono section input impedanceafter the initial set-up, as discussed below, please

note the following: Never adjust an_v of the.. internal switches while the amplifier the KSP-7Bis driving is turned on.