Krell Industries MD2 manual Doyou recommendI leave the MD-2ONatall times? QAI

Doyou recommendI leave the MD-2ONat all times?

QAI

Yes. Thesecircuits are most accurate and stable when left to idle whilenot in use. In fact, discrete parts age faster whencycled ONand OFF. The MD-2will sound better andlast longer if left ON.

NOTE:Youshould disconnect the ACcord from the wall outlet before any electrical stormsor if youplan to be awayfrom your homefor prolonged periods of time.

~Willthe MD-play2 if the dust coveris fully raised?

AQI

Certainly. Theunit will function perfectly evenwith the dust cover removed.

Q. Dueto the exposednature of the laser assemblyis there a possibility of damagethroughlaser radiation?

A. No. There is an optical sensor under the CDwhenit is positioned on the transport hub. This allows the MD-2to prohibit the laser fromturning on whenit is not covered with a CD.

IQ. I ownmanyCD's which have CDRings on them. Am able to use these discs with the MD-2?

A. Yes, the MD-2will accept discs with "CDRings".

_D.ueto their very low massthey will not damagethe MD- 2's transport. Whilewecan neither affirm or denythe benefits derived from the use of CDRings, wedo not feel that any type of disc equilibriumdevice is required with the MD-2whenproperly used with our CDStabi- lizer

Caution: Westrongly_ advise against the use of any type

of additional disc stabilizer. Theseitems add too much massto the laser servo system and mayburn out the drive.

Q. Doyou recommendthe use of "Cones" or other damp- ing feet with the MD-2?

A. Dueto the extraordinary rigidity of our machiningand internal dampingwe do not feel that the MD-2requires additional masscouplingor isolation. If youwish to use an after-market isolation device yo~ maydo so without

fear of dam. agingthe MD-2Any.device whichaffi.xes permanentlyto the chassis or requires a breach of the external chassis will void the warranty.