CH. 4 (CONT)
1. Using tone services on a pulse line
If you have pulse service, you can still use special services that require tone signals, such as
1.Be sure T/P is set to P at the back of the unit.
2.Dial the service's main number.
3.When the service answers, press * or press #, any additional numbers you dial are sent as tone signals.
4.After you complete the call and hang up, the phone resets to pulse dialing.
2.To adjust volume and tone clarity during a call
To protect your hearing, always adjust the volume to minimum before picking up the handset.
A. Incoming voice volume
You can adjust the volume of incoming calls by simply sliding the VOL control at the lower right of the unit. This gives you an amplifition up to 20dB. If you want more amplification, follow the steps below:
1.Slide the VOL to minimum, pick up the handset and press AMPLIFY to turn the incoming voice amplifier ON or OFF. When AMPLIFY is on, the AMPLIFY LED comes on.
2.Adjust the volume in the earpiece by moving the VOL slide control. With AMPLIFY on; incoming volume will be up to 53dB. In standard use, the amplifier turns off whenever you hang up the telephone. If you want the amplifier to remain on, slide the AMPLIFY switch underneath the phone to AUTO.
NOTE: AUTO/MANUAL switch on the bottom side of the phone
B. Incoming voice tone
The StarPlus Standard provides extra amplification at the sound frequency you need to boost. To identify the sound frequency range that best suits your needs, follow these step below:
1.After picking up the handset and you hear a voice on the line, press AMPLIFY.
2.Adjust the TONE slide control at the lower left of the unit to suit your hearing.
8
