CHAPTER 4 (CONT.)
Table 1.
GA- Go ahead OPR - Operator
SK - Stop keying PLS - Please
CLD - Could QQ - Question
R - Are CUZ - Because
SHD - Should THX - Thank you
HD- Hold TMR - Tomorrow
MTG - Meeting U - You
NBR - Number UR - Your
OIC - Oh, I see LOL - Laugh out loud
READ SYSTEM STATUS
To check the setting of your PocketComm before you make any changes, press Ctrl-S (Status).
The display will read the internal settings and send to the display:
[NORMAL] [VCO OFF]
[MOBILE] [MIX] [45B]
Press the space bar to initialize the unit. The parameters that are saved in memory will not be
erased even if you replace the battery.
READ MANUFACTURE DATE AND SOFTWARE VERSION
Press (CTRL)+(N) to display the manufactured date and software version. This function is for
manufacturer use.
KROWN POCKETCOMM
PCM3512 VER 1.0 DEC10
RESETYOUR POCKETCOMM
(CTRL)+(B) is used to load manufactures default values and erase all memory.
TYPE YES TO ERASE
Type “YES” on the keyboard to continue. Press space bar three time or (>) right-arrow key to
cancel the reset mode.
14