CHAPTER 4
Setup your Starplus45
Setting up your Starplus45 includes installing backup batteries and mounting the phone. Your Starplus45 will still operate normally in power outrages before it falls back to a regular telephone. Replace with new batteries after each power blackout. For your safe- ty, the Starplus45 can be used to call out with no backup batteries installed.
1. Installing backup battery
Starplus45 uses 4 AA alkaline backup batteries. Unplug the power adapter and telephone line before installing
1. | Insert a coin to the cover latch. Press |
|
| toward the topside to release the battery |
|
| cover on the bottom of the unit. |
|
2. | Remove the battery compartment cover. |
|
3. | Place four AA alkaline batteries into |
|
| the compartment following the |
|
| directional marks. | FIGURE 4.1 |
4.Replace the cover and press down to close the cover.
2. Desktop mounting
1.Install telephone cord to the wall outlet and to the telephone as shown in Figure 4.4
2.Install the handset coiled cord as shown in
Figure 4.4
3. Set the dial mode selector to P (pulse) if you have pulse dialing (rotary). If you have tone dialing, do not change this switch. Manufacturer setting default is tone dial mode.
4.Plug the AC adapter cord into the power jack located on the topside of the
telephone. Plug the AC Adapter into a standard 120VAC wall outlet.
5. Pick up the handset or press speaker button and listen for a dial tone. Your
FIGURE 4.2
FIGURE 4.3
FIGURE 4.4
6
