The AM or PM indicator will be illuminated and should you pass the time you wish to set, just hold in the “auto” button G (q) until desired time is reached.
4.To lock in the time, simply press the “time” button fi (n) again (Note: the time will automatically set in after 4 seconds). The flashing dots in the LCD display will confirm that the time has been properly set.
ingcoffee
Before making your first pot of delicious coffee, we recommend operating the coffee maker once or twice with water only, without ground coffee or a paper filter to remove any possible dust.
Be sure that the water container is empty. Remove literature, etc. if inserted in the water container.
The lid of the glass carafe must be properly positioned during the brewing process. Position the lid over the carafe and snap the rectangular piece onto the handle. The lid is then locked in place.
Make sure that the swing away filter (c) is properly closed during the brewing process. When closing the swivel filter you will feel a noticeable resistance between the swivel filter and the base. Push in firmly until you hear the filter “click” into place.
Caution: If the swivel filter is not completely closed, the “Stop’n Serve” trigger will not function properly,
which may cause hot water or hot coffee to overflow.
The “Stop’n Serve” mechanism is opened as long as the glass carafe is inserted into the machine and sits
properly on the warming plate and the ’ swivel filter is properly closed.
ng the Water Chamber
W Open the hinged lid (see figure 3).
W Pour in the desired quantity of water (see figure 5).
nThe water level indicator shows you how much water you are filling into the container (see figure 61.
The amount of freshly brewed coffee delivered after the brewing process will always be slightly less than the amount put into the water container. This is due to the minimal absorption of the water by the ground coffee. Therefore, put in a little more water to begin with so that you will have the number of cups you desire.
Replace the carafe on the warming plate with the glass carafe lid in position.
Inserting/Changing the j
“NaturActiv’ Fikr
To insert or change the “NaturActiv” filter, remove the plastic filter housing
(r) from inside the water chamber.
nRemove the bottom portion of the housing (see figure 1).
8
