Krups 453 warranty Display, A Note

aroma

aroma

Display

for 4-12 cups of coffee; delivers

astronger, more stimulating coffee, with a powerful aroma

for 1-3 cups of coffee; full flavor and aroma

the carafe pre-warm button f (il. The display will say “on”. Press the 5 button (p). The indicator light will flash, indicating that you have chosen to pre- warm the carafe. Pre-heating takes approximately 5 minutes, after which the brewing process will automatically begin. Once the carafe is pre-heated, the indicator light will stop flashing, but remain solid red.

ANote!

Once you press the carafe pre-warm button, the function is stored in memory. The next time you make coffee, the carafe will automatically be

Approximately 4 seconds after you have made your aroma selection, the time will reappear in the display window. Please note that the last- selected aroma setting will remain in memory until manually changed to a different selection.

U To begin the brewing process, press the “ON/OFF” button * (~1. The indicator light will illuminate, indicating the brewing process has begun (see figure 11).

:;._

This feature allows you to pre-warm the carafe before the brewing process begins. Follow the steps in “Filling the Water Chamber” and “Putting in the Ground Coffee”.

To start the process, select the coffee strength you desire using the “aroma” button ZTr (k). Within 6 seconds, press

pre-warmed.

The function can be cancelled by pressing the carafe pre-warm button during the pre-warm stage. The light will then remain solid red. Carafe pre- warming is automatically cancelled in the event of a power shortage or removal of plug.

When the brewing cycle is complete, the last drop to leave the filter seals the opening within the lid of the carafe. When pouring, the stream of coffee forms a seal on the carafe lid so the remaining coffee is in an airtight container. This reduces evaporation and heat loss, and protects the aroma and freshness of the coffee.

10