English
7
1Removeall of the various packaging, stickers or accessories from both the inside and outside of the kettle.
2Adjust the length of the cordby winding it under the base. Wedge the cord into the notch. (fig 1)
1 TO OPEN THE LID, ACCORDINGTO THE MODEL
- Hinged lid: press if necessary on the locking systemand pull backwards. (fig 2)
- Assistedopening lid: press on the locking system and the lid lifts automatically (fig 3)
- Automatic opening lid: pressthe button at the top of the handle. (fig4)
- Lockablelid: turn the lid to the left to unlock it and lift it. (fig 5)
Toclose the lid, press it down firmly or turn it to the right in the case of the lockable lid.
2 PLACE THE BASE ON A FLAT,STABLE, HEAT-RESISTANTSURFACE AWAYFROM WATER
SPLASHES AND ANY SOURCES OF HEAT.
Yourkettle must only be used with the base that matches it and its own anti-scale filter.
3 FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER.(FIG 6)
Youcan fill the kettle through the spout, which ensures better maintenance of the filter. As a minimum, cover the
element(or the bottom ofthe kettle) with water.
•Neverfill the kettle when it is on its base.
•Do not fill it abovethe maximum level, or below the minimum level. If the kettle is too full, boiling water may spill
out.
•Do not use without water.
•Check that the lid is closed properlybefore use.
4 POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAIN SOCKET.
5 TO START THE KETTLE
Pressthe on/off button positioned on the top or the bottom of the handle according to the model. (fig 7)
6 THE KETTLE MAYHAVE AN INTERNAL LIGHT, DEPENDING ON MODEL
7 THE KETTLE WILL SWITCHOFF AUTOMATICALLY
as soon as the waterreaches boiling point or the chosen temperature. You can stop it manually, before removing it
fromits base to pour the water. Depending on the model, the interior light and the indicator light will go out when
the waterreaches boiling point. Make sure that the on/off button is in the off position after boiling and that the
kettlehas switched off before removing it from its base.
Throwaway the water from the first two/three uses as it may contain dust. Rinse the kettle and the filter separately.
Do not leavewater in the kettle after use as this quickens the formation of scale.
BEFORE USING FOR THE FIRST TIMEUSE
Notice nafta US.qxp:Nafta-usa 8/07/09 11:00 Page 7