3.4.2 802.1Q VLAN
Click [VLAN Mapping Table]
This page is used to setup member ports for each VLAN group. Total of 16 VLAN groups are supported. Actually, the table are shared by Port- based VLAN mode and 802.1Q VLAN mode.
The steps to configure the member ports are:
1.Select Group number : 0 ~ 15.
2.Set [Yes] on the selected port to include it into the member port list.
802.1Q VLAN group mapping is dependent on the received packet type: Untagged packet - Use the least four bits of PVID value of the input port Tagged packet - Use the least four bits of the VID value of the packet
