![Automatic boost function](/images/new-backgrounds/69968/6996819x1.webp)
Operation
Power setting | Automatic boost function | |
Time (min:sec) | ||
| ||
|
| |
1 | 0:50 | |
2 | 1:40 | |
3 | 3:30 | |
4 | 3:40 | |
5 | 5:20 | |
6 | 9:00 | |
7 | 3:30 | |
8 | 4:00 | |
9 | - | |
|
|
Automatic boost function ![Power management](/images/new-backgrounds/69968/6996819xi2.webp)
![Manual background](/images/new-backgrounds/69968/6996819xi3.webp)
Parboiling takes place at power level 9 with the automatic boost function. After a certain time the power level will switch down automatically to a lower simmering setting (1 to 8).
When using the automatic boost function only the simmering setting with which the food is to be cooked through needs to be selected since the elec- tronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and are then heated up at high power. These dishes do not need to be constantly monitored when simmering (e.g. boiling meat for soups).
1.Switch a cooking zone on.
2.Select power setting 9. Pressing the Plus key again will activate the automatic boost function. The power level setting will indicate alternately A and 9 or A and
if no pot has been put on the hob.
3.Then immediately use the Minus key to select a lower simmering setting from 1 to 8. A and the selected simmering setting will blink alter- nately.
4.The automatic boost function will operate as programmed. After a certain time (see chart) the cooking process will be continued with the simmering setting.
Notes
•While the automatic boost function is in operation, the Plus key can be used to raise the simmering power setting. Pressing the Minus key
will switch the automatic boost function off.
•If, after activating the automatic boost function, the power level is left at level 9 and no lower simmering setting is selected, the automatic boost function will be switched off automatically after 10 seconds and the cooking level will remain at 9.
•If a higher cooking setting or the power boost setting is activated, the auto- matic boost function may switch off if the maximum power level is exceeded (see power management).
Power management
For technical reasons two cooking zones always comprise a module and have a maximum power level. If this power range is exceeded when a higher power setting level or the power boost function is switched on the power man- agement system will reduce the power setting of the corresponding cooking zone of the module.
|
|
| The display for this cooking zone will initially blink, after which the highest- |
|
|
| |
Modules (power management) | possible power setting will be consistently displayed. | ||
|
26