INSTALLATION
8) ELECTRICALCONNECTION
The electrical connections of the appliance must be carried out in compliance with the provisionsandstandardsinforce.
Before connecting the appliance, check that:
- the electrical capacity of the mains supply and current sockets suit the maximum power rating of the appliance (consult the data label applied to the underside of the hot plate).
- The socket or system has an efficient earth connection in compliance with the provisions and standards in force. The manufacturer declines all responsibility for failing to comply with these provisions.
When the appliance is connected to the electricitymainbyasocket:
- fit a standard plug suited to the load indicated on the data label to the cable.
- Fit the wires following figure 8, taking care of respecting the following correspondences:
LetterL(live) = wire; LetterN(neutral) = wire;
earthsymbol 
= greenoryellow-greenwire.
-Never use reductions, adapters of shunts for connection since these could create false contacts and lead to dangerous overheating.
-
When the appliance is connected straight to the electricitymain:
- install an omnipolar
- Remember that the earth wire must not be interrupted by the
- For optimum safety, the electrical connection may also be protected by a high sensitivity differential circuit- breaker.
You are strongly advised to fix the relative yellow- green earth wire to an efficient earthing system.
FIG. 8
9
