Overall and Cutout Dimensions
Below are the required cutout dimensions and the overall dimensions of the cooktop as indicated in Fig. 4
|
| Overall |
| |
|
|
|
| |
| Inches |
| Millimeters | |
W | 33 | 7/8” |
| 860 |
D | 19 | 11/16” |
| 500 |
|
|
|
|
|
| Cutout |
| |
|
|
|
|
| Inches |
| Millimeters |
W | 33 1/16” |
| 840 |
D | 18 7/8” |
| 480 |
|
|
|
|
Fig. 4
Gas tubing and electrical location
Fig 5 shows the location of the gas supply and electrical outlet location. Fig 6 shows the placement of the supplied gas regulator. Refer to the chart for the required measurements.
Fig. 5 | Fig. 6 |
| Inches | millimeters |
|
|
|
A | 1 9/16” | 45 |
B | 8 ¼” | 210 |
C | 8 ½” | 215 |
D | 1/8” | 22 |
|
|
|
Installing the Cooktop
Please inspect all packing materials before discarding. After removing all packaged installation Parts from the box, make sure that the Cooktop is not damaged and is suitable for the particular Gas being used (Natural gas or liquid Propane). The unit is shipped ready to install to Natural gas. If the supplied gas is Liquid Propane (L.P.) Please refer to Page for gas conversion.
To prevent liquids from leaking accidentally into the underlying storage space, the appliance is equipped with a special gasket. Lay out the gasket and remove the protective coating and apply the gasket along the edge of the cabinet opening as indicated in Fig. 5.
Fig. 5
4
