• Drilling fixing holes item 1:

a)Mark a point on the vertical line at a distance from the cooking appliances of: d =1000 min (distance without splashback).

d =height of splashback + 350 mm (distance with splashback).The distance H is the minimum height in mm from the cooking appliances to the bottom edge of the front panel of the hood.

b)At the point marked, draw a horizontal line parallel to the cooking appliances.

c)Drill two holes in the wall 1 using an 8 mm drill bit (fig.2a), and insert the rawl plugs and screws into the holes 1 (4.2 x 44.4 screws). Fix the screws, leaving a space of 5-6 mm required to hook up the canopy. Small adjustments can be made using the hood adjustment screws (see Fitting the canopy). The hood should have a maximum excursion of 20 mm.

•Splashback (optional)

When a splashback is to be fitted, the distance between the hood and the cooking appliances will be determined by the height of the splashback B and whether or not there is a raised back on the worktop. The splashback is to be installed before installing the canopy. If the splashback is to be fixed to the wall using both the top and bottom fixing holes, care must be taken to ensure that the splashback is fitted at the correct height before fixing the base units or at least the worktop covering them. As this is a complex

operation, it should only be undertaken by the technician installing the kitchen units or by a competent person who knows the final dimensions of the units. If the splashback is to be fixed through the top fixing holes only, proceed as follows:

a)Rest the splashback on the worktop and against the wall, as illustrated in fig.2 .

b)Mark the centres of the two holes in the top surface.

c)Drill the wall using an 8 mm drill bit, and fix the splashback using the rawl plugs and screws provided.

d)If necessary, the installer should secure the splashback to the wall by tucking the bottom edge down behind the rear of the worktop.

Fixing the canopy

Before starting to fix the canopy it will be necessary to adjust the support brackets S1 by turning the adjustment screws in a clockwise direction until their reach their limit (Fig.3):

a)Hook the canopy onto the two size 4.2 x 44.4 screws 1 fitted as described above (Fig.4).

b)Level the hood by turning the adjustment screws and then locking them.

Ducting or Recirculation fitting

•Ducting fitting

•The hood can be ducted to the outside using either rigid or flexible ducting Ø 150 mm, the choice of which is left to the installer (fig.5).

•If the hood is supplied with the activated charcoal filters fitted, the filters should be removed (see paragraph on Maintenance).

GB

7

Page 6 Page 8
Page 7
Image 7
Kuppersbusch USA KD 6500.1 manual Fixing the canopy, Ducting or Recirculation fitting, Drilling fixing holes item
Page 6 Page 8

KD 6500.1 specifications

The Kuppersbusch USA KD 6500.1 is a premium kitchen appliance that exemplifies superior German engineering and modern technology. As a built-in oven, it combines aesthetics, functionality, and high-performance cooking capabilities to meet the demands of contemporary culinary enthusiasts.

One of the standout features of the KD 6500.1 is its spacious interior, providing ample cooking space for large meals. With a capacity of 5.8 cubic feet, it allows users to bake, roast, and broil multiple dishes simultaneously. This makes it ideal for preparing festive meals or family gatherings. In terms of design, the oven boasts a sleek, minimalist aesthetic with a stainless steel finish that complements any kitchen décor. The integrated handle and seamless glass door enhance its modern appeal, while the soft-close mechanism ensures smooth operation.

The KD 6500.1 is equipped with advanced cooking technologies, including convection cooking and a multi-sensor temperature control system. The convection feature promotes even heat distribution, resulting in perfectly cooked dishes, while reducing cooking times. The multi-sensor system monitors the internal temperature of the food, ensuring precision and preventing overcooking.

Another significant highlight of the KD 6500.1 is its intuitive touch control panel. The user-friendly interface allows for easy navigation through various cooking modes and settings, including traditional baking, grilling, and self-cleaning. Additionally, the oven offers a variety of preset programs, making it exceptionally easy for users to achieve consistent results regardless of their cooking experience.

Energy efficiency is a key aspect of the Kuppersbusch KD 6500.1. It is designed to minimize energy consumption without compromising performance, thereby contributing to a more sustainable kitchen environment. The oven also features a high-quality insulation system that keeps external surfaces cool to the touch, enhancing safety during use.

In summary, the Kuppersbusch USA KD 6500.1 is an innovative built-in oven that brings together style, functionality, and cutting-edge technology. With its generous capacity, advanced cooking features, and intuitive controls, it is a fantastic addition to any modern kitchen, catering to both everyday meals and gourmet cooking experiences. Whether you're a novice home cook or a seasoned chef, the KD 6500.1 promises reliable performance and exceptional results.
Top Page Image Contents