EXPLANATION OF CONTROLS
FRONT PANEL
1)Effects Controls: Adjusts the amount of signal that is sent to the digital effects processor.
2)Monitor Controls: Adjusts the amount of signal that is sent to the Master Monitor control.
3)Tone Controls: Adjusts the balance of bass and treble from the individual channels.
4)Main Controls: Adjusts the volume of the individual channel.
5)Line Input: Input connection for 1/4" line level sources (Keyboards, drum machines, etc.)
6)Microphone Input: Input connection for balanced
9)Effects Send: Output connector used to send a line level signal from the KPM7200 to an outboard effect. This connector takes a signal feed from the individual channel's Effects controls.
10)Aux Return: Input connector used to receive a signal from an outboard effect or signal source. The signal from this connector is fed to the effect Master (16) control. The Effect Master control (16) will adjust the volume of this signal source.
11)Preamp Output: Line level output for the preamp. This control takes a signal feed from the Main Master control.
12)Power Amp Input: Input connector for the Power Amp. NOTE: When a line level signal source is inserted into this connector, the signal from the Kustom KPM7200's individual channels are disconnected and will not function. Only the outboard signal source will be amplified.
13)Monitor Output: Output connector to send a line level signal to a monitor amplifier or powered monitor.
14)Footswitch: Standard
15)Digital Effects Indicators: These LED's show what digital effects have been chose. NOTE: No LED's are lit when the Effects are muted via footswitch.
16)Effects Master: Controls the volume of digital effect signal to the Main Master control.
19)Equalizer: These controls adjust overall tone of the mixer. Each slide control adjusts the amount of specific frequencies + or – 12dB.
20)Main Master: Controls the total volume on the individual channels. NOTE: The playback volume is not affected by the Main Master control.
21)Power On Indicator: Power is on when LED is lit.
22)Monitor Master: Controls the total volume of the individual channel's monitor sends.
NOTE: The Monitor output is still active when Main channels are muted via footswitch.
3