POWER AMP OUTPUTS, AC POWER

4950

ASPEAKERS

52

53

AC FUSE

FUSE: T8A / 250V

120V 60Hz 160W

B

MODEL KPM8420

POWERED MIXER

ON

51

OFF

POWER

POWER AMP OUTPUT

SPEAKERS A:

These two ¼” jacks deliver the power from the A power-amp to the speakers.

SPEAKERS B:

These two ¼” jacks deliver the power from the B power-amp to the speakers.

MINIMUM LOAD (Impedance) Per Channel:

4 OHMS

POWER RATING Per Channel:

200 Watts@4 ohms, 125 Watts@8 ohms. Both amps driven to 100%

Caution: Use speakers rated at 125 Watts @ 8 ohms or higher. Severe damage to the speakers is possible if too low of wattage speaker is used.

AC POWER

POWER ON / OFF Switch:

The KPM8420 is ON when the switch is in the UP position. Press the switch to the DOWN position to turn the KPM8420 off. Always remove the AC plug from the wall when not in use.

AC Power Cord Receptacle:

Insert the AC cord (Provided) firmly into the AC connector. NOTE: Replace the AC power cord if protective jacket is damaged or ground pin is damaged or removed.

FUSE:

The fuse is located in a housing just below the receptacle. Replace only with same type and size. To remove the fuse, pull the tab located above the fuse symbol away from the fuse housing.

10

Page 10
Image 10
Kustom KPM8420 owner manual Power AMP OUTPUTS, AC Power, Power AMP Output