Kustom KPM8420 owner manual Channels

CHANNELS

1	2	4	5	6	7	8	9	10
Line/Mic	Pad	Main	Monitor	Bass	Mid	Treble	Effects 2	Effects 1
Line/Mic	Pad Line/ Inst

3

LINE/MIC Input Jacks:

These are combination input jacks capable of receiving a Male-XLR for Balanced inputs such as microphones or a Male ¼” Plug for Line level and Instrument level devices.

MID Control:

Adjusts the amount of mid-range frequencies of the individual channels to the main output section. (NOTE: This control does not affect the monitor signal).

PAD Switch:

This switch attenuates the input signal by 12db in the out position. Press in when more input signal gain is needed. If the input sounds distorted, then use the out position.

TREBLE Control:

Adjusts the amount of Treble or high frequencies of the individual channels to the main output section. (NOTE: This control does not affect the monitor signal).

LINE/INSTRUMENT Buttons (Channels

7&8 Only):

When the button is out, the ¼” input is configured to receive a standard Line level input such as a High-Z microphone, keyboard, drum machine, etc. When this button is pressed, the input is configured to receive an input from an electric or acoustic guitar. No additional preamps are necessary to amplify acoustic guitars with piezo pickups.

MAIN Volume Control:

Adjusts the volume of the individual channels to the MAIN output section.

MONITOR Volume Control:

Adjusts the volume of the individual channels to the MONITOR output section.

EFFECTS 2 Control:

This control adjusts the amount of signal sent to the EFFECTS 2 master section. Note: This control is post fader, meaning the Effects 2 control gets it's signal from the MAIN volume control. The MAIN volume control must be turned up to allow signal to flow to the EFFECTS 2 Control.

EFFECTS 1 Control:

This control adjusts the amount of signal sent to the EFFECTS 1 master section. Note: This control is post fader, meaning the Effects 1 control gets it's signal from the MAIN volume control. The MAIN volume control must be turned up to allow signal to flow to the EFFECTS 1 Control.

BASS Control:

Adjusts the amount of bass or low frequencies of the individual channels to the main output section. (NOTE: This control does not affect the monitor signal).

5