2.NetWare Configuration.
êSelect Setup NetWare in the Protocols column.
êEnter the Print Server Name, Preferred NDS Context, and Print Server Password (if a password was defined) exactly as they were entered in NWAdmin. Note: Entries are not case sensitive (except the sysadm pass- word). Preferred Bindery File Server and Preferred NDS Tree should remain blank unless Bindery mode is used or if the network includes multiple NDS trees.
êIf not using Bindery emulation, click the Disable Bindery box.
êType the password, sysadm, in the appropriate box and click Accept Settings. After a few seconds the screen should report that the update was successful. Click the Back Arrow icon twice to return to the 3000E Configura- tion page.
êThe changes made to the 3000E do not take effect until the unit is reset. Click on Reset in the System column, then click on the Reset Unit button. After a few seconds the screen should report that the unit was reset.
3.Confirm Successful Configuration.
êReconnect to the 3000E. After the Reset, the program advises waiting 2 minutes before reconnecting, but the 3000E may be available sooner.
êAt the 3000E Configuration page, select Unit Status in the System column.
êScroll down to display the NetWare status. The Queue Status should be Attached.
êIf the Queue Status is not Attached, please verify that the entries for Print Server Name, Preferred NDS Context, and Print Server Password match those defined in NWAdmin or refer to the troubleshooting section in the User’s Manual.
9
