Kyocera L4, L3 Operations when LCD Bright is selected, Operations when EX Comp is selected

SET UP

Using Setup “SET UP” Mode Functions

Operations when [LCD BRIGHT] is selected

You can use this function in camera modes or in movie modes.

Operation

Turn on the power first and set the [CUSTOM SET.] in Setup modes to [LCD BRIGHT].

1Set the mode select dial to “s” or “m”.

DISP.

MENU

2Press the (+) and (–) buttons to set the brightness on the LCD.

To make the display brighter, press the (+) button.

To make the display darker, press the (–) button.

●The brightness setting determined with the (+) and (–) buttons will be released when any of the following operations are executed. To fix the brightness on the LCD, set the value using [BRIGHT CNTRL] (page 80) in the SETUP mode.

·Pressing the menu button

·Turning the mode select dial to switch over to other modes

·Turning off the power switch

Operations when [EX COMP] is selected

The compensation value can be set between –2.0 and +2.0 in 0.3 (EV) steps by pressing the (+) or (–) button each time.

Operation

Turn on the power first and set the [CUSTOM SET.] in Setup modes to [EX COMP].

1Set the mode select dial to “s” or “m”.

86