Paper Handling
1-35
Setting the Duplex Path
To use this function, the duplexer must be installed on the printer.
If the paper type is set to Custom and the option duplexer is installed on
the printer, you can set whether or not to enable duplex printing as follows.
The default setting is Enable.
1Display the custom paper type (see Creating Custom Paper Type
on page 1-32) and press the > key.
2Press the or key repeatedly until >>Duplex Path appears.
3Press the ENTER key. A blinking question mark (?) appears.
4Select Enable or Disable using the or key. For details of the
default setting for each paper type, see Paper Type on page 2-12.
5Press the ENTER key.
6Press the MENU key. The message display returns to Ready.
The custom paper type setting is completed.
Option
>>Duplex Path
Enable
>>Duplex Path
? Enable