Configuration
1-100
Sleep Timer Setting
The printer has a sleep timer to conserve power when the printer is not
printing, processing, or receiving data. You can adjust the timer value, the
length of time the printer waits before entering sleeping mode in the
absence of data.
1Press the MENU key.
2Press the or key repeatedly until Others > appears.
3Press the > key.
4Press the or key repeatedly until >Sleep Timer > appears.
The default setting is 015 min.
5Press the ENTER key. A blinking cursor ( _ ) appears.
6Press the or key to increase or decrease the value of the figure
where the cursor is blinking and set the desired time. The timer can
be set between 5 and 240 min, in 5-minute increments. You can use
the > and < keys to move the cursor right and left.
7Press the ENTER key.
8Press the MENU key. The message display returns to Ready.
Others >
>Sleep Timer >
015 min.
>Sleep Timer
015 min.