1GETTING STARTED
Installing the battery
Your Kyocera K312 phone comes with a removable lithium ion (LiIon) battery. Fully
charge the battery before using the phone.
You must use a
To install the battery:
1.Hold the phone
face down.
2.Slide the battery door downward to remove it.
3.Place the battery in the phone casing with the
metal contacts facing towards the bottom of the phone.
4.Replace the battery door by sliding the notches into
the openings at the bottom and outside edges of the battery casing.
5.Slide the door up to secure the cover into place.
Charging the battery
You must have at least a partial charge in the battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter to the jack on the bottom of the phone.
2.Plug the adapter into a wall outlet.
The battery icon in the
•Charging (the icon is animated)
•Partially charged
• Fully charged
Note: The battery will not charge if you use the phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time, even if it has a partial charge.
Note: To remove the battery, make sure the phone is powered off.
User Guide for the Kyocera K312 Phone | 1 |