2.Select a timer:
–Recent Calls Timer tracks all calls you have made and received since you last
reset this timer. To reset this timer to zero,
press to select Reset.
–All Calls Timer tracks all calls you have made and received. This timer cannot be reset.
Timing your calls
You can set your phone to beep 10 seconds before each minute passes when you are on a call.
•Select Menu → Settings → Sounds → Minute Alert → Enabled.
Receiving data or faxes
Your phone may be able to receive certain data or faxes, depending on the system sending the information. For more information, see page 41.
Understanding roaming
Controlling network roaming
Depending on services available from your service provider, you may set the phone to either digital or analog mode. This is useful if you are in an area that borders on digital service and the automatic feature is causing the phone to keep switching between modes.
1.Select Menu → Settings → Network → Digital/Analog.
2.Select an option and press .
–Automatic automatically switches the phone between digital and analog.
–Analog only sets the phone to work in analog mode only.
–Analog call forces a call into analog mode for the duration of the next call.
–Digital only sets the phone to work in digital mode only.
Setting an alert for roaming
You may use this setting if you want the phone to alert you when you roam outside of your home service area.
1.Select Menu → Settings → Network → Roam/Svc Alert.
2.Select an option and press .
–When no svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again.
–On roam change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again.
–On any change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.
User Guide for the Kyocera K312 Phone | 13 |