Basic > Wireless (Security–No Encryption)

Wireless Mode- Enabled is the default . Selecting this option will allow you to set your Wireless Access Point (WAP) settings. Selecting Disabled, will grey-out all Security radio buttons (please see “Security” below).

SSID-

Service Set Identifier (SSID) is the name designated for a specific wireless local area network

 

(WLAN). The SSID's factory default setting is KR1. The SSID can be easily changed to

 

establish a new wireless network.

 

(Note: SSID names may contain up to 32 ASCII characters).

Channel-

Auto Select is the default . Devices on the network must share the same channel. (Note: Wireless

 

adapters automatically scan and match the wireless settings. You may also select the channel you

 

wish to use).

Security-

You may select from three levels of encryption to secure your wireless network:

 

No Encryption, WEP, or WPA-PSK.

Security-

No Encryption is the default (as shown in the screen above).

10

Kyocera KR1 Mobile Router User Guide

Page 14
Image 14
Kyocera KR1 manual No Encryption is the default as shown in the screen above