1.Select Menu → Settings → Network → Set Phone Line.
2.Select one of the two lines and press 
.
Data Settings
Note: Data features apply to Milan KX9C only and are supported only when the flip is closed.
Setting Com port speed
The Com Speed sets the data rate at which your phone connects to a laptop or personal computer or at which it sends and receives
1.Select Menu → Settings → Accessories → Com Port Speed.
2.Select the speed: 19.2 kbps, 115.2 kbps
(default), or 230.4 kbps.
Note: There may be a higher charge for making calls using
Setting the phone to receive data or faxes
Your phone may be able to receive certain data or faxes, depending on the system sending the information. You cannot receive voice calls while the phone is in data/fax mode. To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode to data/ fax mode.
Note: To purchase a data cable call
1.Connect the phone to the laptop or PC.
2.Set the Com Port speed.
3.Select Menu → Settings → Network → Data/Fax Calls.
4.Select an option and press 
:
–Voice only allows only voice calls.
–Fax, next call or Data, next call sets the phone to fax mode or data mode for the next incoming call or the next 10 minutes.
–Fax, until off or Data, until off forces the phone into fax or data mode until the phone is turned off.
Note: You cannot receive voice calls while the phone is in data/fax mode.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the hearing impaired.
Note: Enable TTY only when using the phone with a TTY device.
1.Connect the TTY device to the phone.
2.Enter 
from your keypad.
3.Select the TTY option.
4.Press 
to clear the message.
5.Highlight an option and press 
.
36 | Customizing Your Phone |
