OPERATION
Notes:
•You can use a wireless and wired microphone at the same time.
•Be sure to select the correct fre- quency channel for your PA sys- tem to match your wireless microphone’s operating fre- quency channel.
Using a Wireless Microphone
1.Rotate WIRELESS MIC VOLUME counterclockwise to the mini- mum level (the smallest dot on the left side of the knob).
2.Select the frequency channel on the PA system to match your microphone’s operating fre- quency channel or channel com- bination by setting the DIP switch located on the back of the PA system.
For example, if your microphone frequency is A, use a sturdy
pen or finger nail file) to set each
switch on the DIP to as indi- cated by the operation channel combination table located on the back panel. The “ ” represents the raised nub on each switch.
Back Panel
DIP Switch
Switch
Diagrams
Frequency
Channel
Codes
Notes:
•Wireless microphones are sold in three channel combinations: AEH, BDG, and CFH.
•If you use two receivers in the same room with a separate wireless microphone assigned to each receiver, make sure the channels are not adjacent
(follow in alphabetical sequence). For example, if one receiver is set to channel G and the other to H, it will create interference. To remove the interference, set one receiver to H and the other to F.
3.Set ON/OFF to ON. POWER lights.
4.Set the wireless microphone’s ON/OFF switch to ON. READY lights.
5