5.Rotate WIRELESS MIC VOLUME to the desired level. (The larger the dot, the higher the level.)
6.When you finish using the PA system, turn WIRELESS MIC VOL- UME to the minimum position and set ON/OFF to OFF.
Using a Wired Microphone
1.Connect the wired microphone to the amplifier’s MIC jack located on the back of the amplifier.
2.Rotate MIC VOLUME counter- clockwise to the minimum level (the smallest dot on the left side of the knob).
3.Set ON/OFF to ON. POWER lights.
4.Set the microphone’s ON/OFF switch to ON.
5.Rotate MIC VOLUME to the desired level. (The larger the dot, the higher the level.)
6.When you finish using the PA system, rotate MIC VOLUME to the minimum position and set ON/ OFF to OFF.
6
TROUBLESHOOTING
If you have problems operating your amplifier, try these suggestions. If you still have problems, contact your local RadioShack store for assistance.
Problem | Suggestion |
|
| |
|
|
|
|
|
|
|
|
|
|
No power | Make sure the AC or |
|
| |
| DC cord is properly |
|
| |
| connected. |
|
| |
|
|
|
|
|
| Make sure the |
|
| |
| power is turned on. |
|
| |
|
|
|
|
|
| Check the fuses and |
|
| |
| replace them if |
|
| |
| needed. |
|
| |
|
|
|
|
|
No sound | Make sure your |
|
| |
(wireless | transmitter and |
|
| |
microphone) | amplifier are operat- |
|
| |
| ing on the same fre- |
|
| |
| quency. |
|
| |
|
|
|
|
|
| Adjust the wireless |
|
| |
| microphone volume |
|
| |
| control. |
|
| |
|
|
|
|
|
| Make sure the |
|
| |
| microphone trans- |
|
| |
| mitter is working and |
|
| |
| you are within 150 |
|
| |
| feet of the system. |
|
| |
|
|
|
|
|
No sound | Make sure your |
|
| |
(wired | wired microphone is |
|
| |
microphone) | properly connected |
|
| |
| and the microphone |
|
| |
| is not defective. |
|
| |
|
|
|
|
|
| Adjust the wired |
|
| |
| microphone volume |
|
| |
| control. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|