CARE AND MAINTENANCE
To enjoy your PA system for a long time:
•Keep the system dry. If it gets it wet, wipe it dry immediately.
•Use and store the system only in normal temperature environ- ments.
•Handle the system gently and carefully. Don’t drop it.
•Keep the system away from dust and dirt.
•Wipe the system with a damp cloth occasionally to keep it look new.
Modifying or tampering with the am- plifier’s internal components can cause a malfunction and invalidate its warranty and void your FCC authori- zation to operate it. If your amplifier is not performing as it should, take it to your local RadioShack store for assis- tance.
In the Back of the PA System
1. Set ON/OFF to OFF and unplug it.
2. Insert a
3.Remove the fuse holder’s cap then pull out the fuse.
4.If the fuse is blown (the inside wire is broken), remove it and replace it with a 1.5A/125V fuse.
5.Insert the fuse holder’s cap back into the socket on the back of the amplifier.
6.Carefully tighten the fuse holder’s cap by pushing it in and rotating it clockwise until it locks.
REPLACING THE FUSE
If the PA system stops operating properly, you might need to replace the fuse in the back of the system or the
Important: Turn off the PA system and let it cool. Then try operating it again before you replace the fuse.
Caution: Do not use a fuse with rat- ings other than those specified. Doing so might damage your amplifier.
In the DC Cord
1.Unplug the DC cord from the cig-
2.Turn the cap counter clockwise to open the plug, then remove the fuse taking care not to lose the tip.
3.Replace the fuse with a new fuse of the same rating (3A/125V) and type.
4.Replace the cap and turn it clockwise to secure it closed.
7
