User Guide 47
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your Wake Up
command, see “Voice training” on page46.

Voice answer

You can use your voice to answer a call when
using a hands-free accessory.

Enable voice answer

Select Menu > Settings > Voice Features >
Voice Answer > With Accessory to enable
answering calls with an accessory.
Note: To use the voice answer feature, you must
have the Auto-Answer feature disabled (see
“Auto answer” on page47), the Out of headset
option selected (see “Headset sounds” on
page47), and the phone set to Normal Sounds
(see “Ringer mode” on page40).

Use voice answer

When you receive an incoming call, the phone
prompts “Incoming call, answer?”. If the caller is
recognized as a contact entry in your phone, the
phone prompts “Incoming call from (Name),
answer?”. Say “Yes” to answer or “No” to silence
the alert without answering.

Expert mode

The expert mode enables you to speak the
command after you hear a tone instead of
speaking a command following the initial voice
prompts. Select Menu > Settings >
Voice Features > Expert Mode and one of
thefollowing:
•Normal sets phone to default voice prompts.
•Expert sets phone to sound tones instead of
voice prompts.
Accessories
This section describes settings that affect
accessories you use with your phone.

Headset sounds

With a headset attached to your phone, you
canplay the ringer through the headset or
phonespeaker.
Select Menu > Settings > Accessories >
Headset Sounds and one of the following.
•Out of phone rings from the phone speaker.
•Out of headset rings from the headset.

Auto answer

With a headset or hands-free kit attached to
yourphone, you can set the phone to
answerautomatically.
Select Menu > Settings > Accessories >
Auto-Answer > After 5 Seconds. The phone
automatically answers after 5 seconds.
82-K6563-1EN.book Pa ge 47 Monday, March 1 7, 2008 8:33 PM