User Guide 61
14 VOICE COMMANDS
You can call a contact, dial a phone number,
access menus, or find contact information from
your voice dial list using voicecommands.
Note: You cannot use voice recognition to end
acall; you must press the End key when the flip
isopen.

Voice dial list

To call or find a contact using voice dial, you must
add the contact to your voice dial list. The contact
name must not have more than five words or
components for voice recognition.

Add contacts

To add a contact to your voice dial list:
1. Select Menu > Contacts > Voice Dial List.
2. At the contacts list, highlight a contact and
press the OK key. A check mark appears
next to a name when voice dialing is
active.Check each name you want to use
with voice dialing.
3. Select Save.

Remove contacts

To add a contact to your voice dial list:
1. Select Menu > Contacts > Voice Dial List.
2. At the contacts list, highlight a check marked
contact and press the OK key. No check
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
want to remove from voice dialing.
3. Select Save.

Voice commands

Start voice commands

1. Press and hold the Send key to initiate voice
commands. The phone prompts,
“Say a command”.
2. Say one of the following commands and
follow the voice prompts.
–“Contact <name>” calls a contact on
your voice dial list.
–“Dial Number <#>” calls by speaking
the digits of the phone number.
–“<shortcut name>” sends you to a
menu item.
–“Find Contact” allows you to find a
contact from your voice dial list.

Call a contact name

1. If you haven’t already done so, add the
person you want to call to the Voice Dial List.
See “Voice dial list” on page61.
82-K6563-1EN.book Pa ge 61 Monday, March 1 7, 2008 8:33 PM