FEATURES:
Six digit time display
Atomic time and date with manual set option
Automatically updates for Daylight Saving Time (on/off option)
Barometric pressure with
Forecast icons: sunny, partly cloudy, cloudy, rainy and stormy. Time Alarm
Perpetual calendar.
Indoor temperature (°F or °C) Outdoor temperature (°F or °C) Can read up to 3 outdoor sensors
Temperature trend indicators for indoor and outdoor temperature: up, steady, down. Minimum and Maximum indoor and outdoor temperature
Wall hanging or free standing
Low battery indicator for receiver and transmitter 100 foot wireless transmission range (open air)
SET UP:
IMPORTANT: Do not mix old and new batteries.
Remove the screws and the battery cover from the back of the transmitter with a small screwdriver. (see install batteries in transmitter).
Set the transmitter to Channel 1.
NOTE: if you have additional transmitters set them to channel 2 and channel 3 respectively. Insert fresh alkaline batteries into the transmitter, observing the correct polarity (see marking inside battery compartment). Keep the transmitter
Select Fahrenheit or Celsius for the sensor display.
Within 30 seconds of powering up the transmitter, insert batteries into the Weather station, observing the correct polarity (see install batteries in the weather station). Once the batteries are in place, all segments of the LCD will light up briefly. Following the indoor temperature will be displayed. If the indoor temperature is not shown in the LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them.
2