10
Note: In both cases it is important to power the units in this order
because the transmitter will send an identification code which
has to be received and stored by the Base Station within the
first few minutes of operation.
After doing this, full operation of the entire Weather Station System is
ensured.
3.2.3 Cable Connection:
An additional feature of the direct cable connection (mentioned in Item
3.1 above) is when using the AC/DC adapter, power is provided to
both the Base Station and the Transmitter unit by only the AC/DC
adapter.
Note: System operation with cable connection while at the same time
providing power to the Base Station solely by batteries is not
recommended due to the considerably higher power
consumption. The batteries may however remain in the unit for
emergency supply in case of a power failure.
A change from cable operation to 433 MHz radio transmission
or vice versa is possible because the Weather Station will
recognize this change and will automatically switch to the
appropriate operating mode.
OUTDOOR
TX