La Crosse Technology WS-7026U instruction manual Snoozing and Stopping the Alarm

2.Press the IN button to set the alarm hours and the OUT button to set the alarm minutes.

3.Press the AL1 button or wait 15 seconds for the unit to automatically confirm the alarm time and return to display the date in the DATE LCD as normal.

4.The ((1)) icon, appearing in the DATE LCD, indicates that the alarm is set to sound at the programmed time.

5.Programming the alarm time automatically activates the alarm to sound at the programmed time. To deactivate the alarm, press the AL1 button (removing the ((1)) icon from the screen). To reactivate the alarm, press the AL1 button again.

6.After each activation or deactivation, the programmed alarm time is displayed. Wait 15 seconds and the date will display in the DATE LCD again.

7.To set, activate and deactivate alarm 2, follow the directions above for alarm 1—using the AL2 button instead of the AL1 button. The ((2)) icon will represent activation and deactivation of alarm 2.

B. SNOOZING AND STOPPING THE ALARM

1.The snooze function is activated by pressing any one of the following buttons: SET, IN, OUT or SNZ.

2.To turn the alarm off completely, press any of these buttons: CH, AL1, AL2 or DATE.

3.The snooze function will last for 5 minutes before the alarm begins to sound again. Either the ((1)) or the ((2)) icon will flash during the snooze mode.

VII. ADDING OUTDOOR THERMO HYGRO SENSORS (OPTIONAL)

The WS-7026U is able to receive signals from as many as 3 different Thermo Hygro Sensors. The Remote Sensor model(s) that you choose will come with their own set of instructions—follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set-up of Remote Sensor units with the WS-7026U. These extra sensors can be purchased through the same dealer as this unit or by

15