La Crosse Technology WS-7026U instruction manual Quick SET-UP Guide, Weather Station

a second per day. These physicists have created an international standard measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum.

QUICK SET-UP GUIDE

1.Insert two AA batteries into the Thermo Hygro Sensor.

2.Insert two AA batteries into the WEATHER STATION.

3.Wait 5 minutes or until the outdoor temperature and humidity are displayed in the OUTDOOR LCD (Liquid Crystal Display).

4.Wait 6-10 minutes (in ideal reception conditions) for the WWVB time to be displayed in the TIME LCD. If the WWVB takes longer to set, you may manually set the time (see complete instructions). Or you can wait until after the weather station conducts its programmed search at the ideal reception time period of 12:00 AM to 6:00 AM.

5.Mount the units ensuring that all units are sending and receiving signals.

Note: The Thermo Hygro Sensor transmits a signal every 3 minutes. After the batteries have been installed, the weather station will search for the signal for a duration of 5 minutes. If there is no temperature reading in the OUTDOOR LCD after 5 minutes, make sure the units are within range of each other or repeat the battery installation procedure.

DETAILED SET-UP GUIDE

I.BATTERY INSTALLATION

A.THERMO HYGRO SENSOR

1.Pull the cylindrical rain cover off the sensor.

2.Remove the battery cover (located on the backside of the sensor above the mounting post and bracket).

3.Press the arrow and slide the battery cover off.

4.Observing the correct polarity install 2 AA batteries.

5.Replace battery cover and place rain cover snugly onto the sensor.

B.WEATHER STATION

1.Remove the battery cover. To do this, insert a solid object in the space provided at the

4