Using the Table Stand | La Crosse Technology WS-7168U instruction

A. USING THE TABLE STAND

The indoor weather station comes with the table stand already mounted. If you wish to use the table-stand all that is required is to place the indoor weather station in an appropriate location.

B.WALL MOUNTING

1)Remove the table-stand. To do this, pull down on the stand from the rear and rotate forward.

2)Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall.

3)Place the indoor weather station onto the screw using the hanging hole on the backside.

4)Gently pull the indoor weather station down to lock the screw into place.

21

Image 21

La Crosse Technology WS-7168U instruction manual Using the Table Stand, Wall Mounting

Contents

WS-7168U Table of Contents Inventory of Contents Do not Press ANY Buttons for 15 Minutes Quick SET-UP Guide Indoor Weather Station Program Mode Programming Sequence and Default SettingsII. Function Keys IV. Time Zone Setting III. Setting the LCD Contrast HAW Daylight Saving Time DST Setting VII or 24 Hour Time Setting VI. RADIO-CONTROLLED Time ON/OFF Setting VIII. Time Setting Wwvb Remote Control TimeManual Time Setting IX. Setting the YEAR, DAY and Month Setting the Snooze XI. Selecting F or C XII. Setting the Forecast Sensitivity Features of the WS-7168U Weather ForecastWeather Icons Weather Tendency Arrows III. Outdoor Temperature IV. Minimum and Maximum Temperature RecordsViewing the Indoor Temperature Records Resetting the Mimimum and Maximum Records Viewing the Outdoor Temperature Records SET-UP of Multiple Units Adding Remote Temperature Sensors Optional Mounting Outdoor LCD Mounting with Screws Mounting with Adhesive TapeII. the Indoor Weather Station Wall Mounting Using the Table Stand Troubleshooting Maintenance and Care Instructions SpecificationsTemperature measuring range Dimensions H x W x D Power Supply Support@lacrossetechnology.com FCC Disclaimer