
A. THERMO-HYGRO SENSOR
The
•with the use of screws, or
•using the adhesive tape.
A. MOUNTING WITH SCREWS
1.Remove the mounting bracket from the remote
2.Place the mounting bracket over the desired location.
3.Through the three screw holes of the bracket, mark the mounting surface with a pencil.
4.Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket.
5.Insert the
GB P.14
7.During the course of the 15 minutes an outdoor temperature should appear on the display. You can now put your sensor(s) back outside.
MAINTENANCE AND CARE
INSTRUCTIONS
•Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units.
•Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings.
•Do not submerge in water.
•Do not subject the units to unnecessary heat or cold by placing them in the oven or freezer.
•Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs.
SPECIFICATIONS
Transmitting Frequency 915 MHz
TEMPERATURE MEASURING RANGES
Indoor | 14.1˚F to 139.8˚F with |
| 0.2˚F resolution. |
Outdoor | |
| 0.2˚F resolution. |
HUMIDITY MEASURING RANGE | |
Outdoor (%RH) | 1% to 99% |
Transmitting range Maximum 330 feet
GB P.18
B.MOUNTING WITH ADHESIVE TAPE Note: The adhesive tape is not intended to be used as a permanent mounting solution. Only use the adhesive tape while you are positioning the Weather Station and
1.With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat.
2.Remove the protective strip from one side of the tape.
3.Adhere the tape to the designated area on the back of the mounting bracket.
4.Remove the protective strip from the other side of the tape.
5.Position the remote
P.15 GB
(100m) open space
TEMPERATURE CHECKING INTERVAL
Indoor | Every 15 seconds |
Outdoor | Every 4 seconds |
2 x AA, 1.5V |
Wireless Weather Station 2 x AAA, 1.5V
DIMENSION: (H x W x D)
Wireless Weather Station 5.90" x 2.36" x 0.81"
| (150 x 60 x 20.7mm) |
5.05" x 1.5" x 0.83" | |
| (128.3 x 38.2 x 21.2mm) |
Battery life | Up to 24 Months |
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a
This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase
P.19 GB
Note: Mounting with adhesive tape is not recommended as a permanent mounting solution. Only use the adhesive tape during
B. WIRELESS WEATHER STATION
1.The Wireless Weather Station comes with the table stand attached to the back of the Receiver. If you wish to use the
2.To wall mount, push the table stand flat against the Wireless Weather Station (if it isn’t already flat). Fix a screw (not included) into the desired wall, and place the Wireless Weather Station onto the screw using the hanging hole on the backside. Gently pull the Wireless Weather Station down to lock the screw into place.
GB P.16
to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or
GB P.20
TROUBLESHOOTING
NOTE: For problems not solved, please contact La Crosse Technology via
Problem: The LCD is faint
Solution: Replace batteries
Problem: No outdoor temperature is displayed.
Solution:
1.Bring any units from outside, inside and place the units 3 to 5 feet apart with nothing
2.Remove the batteries from all units.
3.Press one of the buttons on the Wireless Weather Station display at least 20 times to clear all memory. Verify that the display is blank before proceeding.
4.Using good quality alkaline batteries, place the batteries back into the outdoor temperature sensor; making sure they are installed according to the diagrams in the battery compartment.
5.Taking care not to press any buttons, reinstall the batteries in the Wireless Weather Station according to the diagram in the battery compartment.
6.Do not press any buttons for at least 15 minutes after installing the batteries. (This is to let the units establish a good connection.)
P.17 GB
neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual;
(5)damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference.. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S
REACH. | P.21 GB |
|