11.Press and release the “SET” button to confirm the year and to advance to °F and °C selection (skip step 1 and 2 in section VI if continuing).
VI. Selecting °F OR °C
1.Press and hold the “SET” button for 2 seconds or until “12h” or “24h” flashes.
2.Press and release the “SET” button 9 times to reach the °F or °C setting mode.
3.“°F” is the default setting and the temperatures (inside and remote) will be flashing.
4.Press and release the “+” button to select °F to °C.
5.Press the “SET” button to confirm and to advance to the LCD setting (skip step 1 and 2 of section VII if continuing).
VII. Setting the LCD Contrast
1.Press and hold the “SET” button for 2 seconds, or until “12h” flashes.
2.Press and release the “SET” key 10 times to reach the LCD contrast setting mode.
3.There are 8 LCD contrast levels to choose from— “Lcd 0” is the lightest, and “Lcd 7” is the darkest. “Lcd 5” is the default setting.
4.Press and release the “+” button to toggle through the settings.
5.Press and release the “SET” button to confirm and exit the programming mode.
13
