Troubleshooting
Problem: | No reception of WWVB time signal | |
Solution: | 1) | Wait overnight for signal. |
| 2) | Be sure indoor weather station is at least 6 feet |
|
| from any electrical devices, such as televisions, |
|
| computers, or other |
| 3) | Remove batteries for five minutes, reinsert and |
|
| leave alone without pressing buttons overnight. |
| 4) | If there are still problems, contact La Crosse |
|
| Technology |
Problem: | Hour is incorrect (minute and date are correct) | |
Solution: | Be sure correct time zone and daylight saving time | |
| are selected. | |
Problem: | The LCD is faint | |
Solution: | 1) | Set the LCD contrast to a higher number |
| 2) | Replace batteries |
Problem: | No remote temperature is displayed | |
Solution: | 1) | Remove all batteries, reinsert into remote |
|
| sensor(s) first, then indoor weather station. |
| 2) | Place remote sensor(s) closer to indoor weather |
|
| station. |
| 3) | Be sure all batteries are fresh. |
Problem: | Remote humidity displays “- | |
Solution: | 1) A temperature only sensor is being used and | |
|
| displayed |
| 2) The humidity is outside the range of | |
NOTE: For problems not solved, please contact La Crosse Technology.
22
