B. Time, 12/24 Hour Mode and Date Setting
The WWVB signal will override any manual set time and date information. The time will be based on the time zone selected.
1.Press and hold the “SET” button for 1 second.
2.The hour is now flashing.
3.Press and release the “+” or
Note: In 12h mode “PM” will appear to the left of the time during PM hours. If the time is not within the PM hours nothing will be displayed. Be sure to set the time to the correct AM/PM time to ensure automatic reception.
4.Press the “SET” button to advance to the minute
5.The minute is now flashing.
6.Press and release the “+”or
7.Press and release the “SET” button to advance to the
8.“12” is now flashing.
9.Press and release the “+”or
10.Press and release the “SET” button to advance to the year setting.
11.The year is now flashing.
12.Press and release the “+”or
13.Press and release the “SET” button to advance to the month setting.
14.The month is now flashing.
15.Press and release the “+”or
16.Press and release the “SET” button to advance to the date setting.
17.The date is now flashing.
18.Press and release the “+”or
19.Press and release the “SET” button to advance to the location setting (skip steps 1 and 2 in section B if continuing).
9