La Crosse Technology WS-8015U instruction manual G. LCD Contrast

16.Press and release the “+”or “–“button to select the storm warning setting. This can be set to 0.09, 0.12, 0.15, 0.18, 0.21, 0.24, or 0.27 inHg (from 3 to 9 hPa). This setting will determine how much of a drop in air pressure over six hours will sound the storm warning alarm.

17.Press and release the “SET” button to advance to the storm warning alarm on/off setting.

18.The storm warning on or off setting will now flash (AOFF default/factory setting).

19.Press and release the “+”or “–“button to select whether or not the storm warning alarm is activated.

20.Press and release the “SET” button to advance to the LCD setting (skip steps 1 and 2 in section F if continuing).

G. LCD Contrast

1.Press and hold the “SET” button for 1 second.

2.Press and release the “SET” button 17 times.

3.The LCD contrast setting will now flash (4 is the default/factory setting).

4.Press and release the “+”or “–“button to select the contrast level desired (from 1 to 8).

5.Press and release the “SET” button to advance to the LI setting.

6.The LI setting will now flash (ON is the default/factory setting).

7.Press and release the “+”or “–“button to select ON or OFF.

8.Press and release the “SET” button to exit the programming mode.

Note: The LI setting does not affect the function of the indoor weather station and is present only for future use.

16